home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 8
/
QRZ Ham Radio Callsign Database - Volume 8.iso
/
pc
/
mac
/
callfind.hqx
/
CallFinder ƒ
/
CallFinder.rsrc
/
STR#_136.txt
< prev
next >
Wrap
Text File
|
1996-03-13
|
4KB
|
241 lines
-120 = Directory not found
-119 = undocumented error code
-118 = undocumented error code
-117 = Trying to move locked block
-116 = size check failed
-115 = block ckeck failed
-114 = pointer ckeck failed
-113 = address in zone check failed
-112 = trying to purge a locked or non-purgeable block
-111 = attempt to operate on a free block
-110 = specified address is odd or out of range
-109 = Master Pointer is NIL
-108 = not enough memory in heap zone
-107 = undocumented error code
-106 = undocumented error code
-105 = undocumented error code
-104 = undocumented error code
-103 = undocumented error code
-102 = no object of that type in scrap
-101 = undocumented error code
-100 = no scrap exists
-99 = AppleTalk error
-98 = AppleTalk error
-97 = AppleTalk error
-96 = undocumented error code
-95 = AppleTalk error
-94 = AppleTalk error
-93 = AppleTalk error
-92 = AppleTalk error
-91 = AppleTalk error
-90 = break received (SCC)
-89 = SCC receiver error (framing, parity, ...)
-88 = InitUtil found parameter RAM uninitialized
-87 = parameter RAM didn't read-verify
-86 = time written didn't verify
-85 = unable to read same clock value twice
-84 = first low-level disk error
-83 = undocumented error code
-82 = undocumented error code
-81 = sector number never found on track
-80 = track number wrong on address mark
-79 = unable to correctlt adjust disk speed
-78 = tried to read 2nd side of 1-side drive
-77 = unable to initialize IWM
-76 = track 0 detect doesn't change
-75 = step handshake failed
-74 = write underrun occurred
-73 = bad data mark slip nibbles
-72 = bad data mark checksum
-71 = couldn't find a data mark header
-70 = bad address mark slip nibbles
-69 = bad address mark checksum
-68 = verify compare during _Read failed
-67 = couldn't find valid address mark
-66 = couldn't find 5 nibbles in 200 tries
-65 = R/W requested for an off-line drive
-64 = drive not installed
-63 = undocumented error code
-62 = undocumented error code
-61 = R/W or open permission doesn't allow writing
-60 = bad master dir block - reinitialize
-59 = problem during _Rename
-58 = external file system error
-57 = not a Mac disk/ bad directory format
-56 = no such drive number/ not in queue
-55 = drive/volume already on-line
-54 = R/W permission doesn't allow writing
-53 = volume not on-line
-52 = undocumented error code
-51 = refNum specifies nonexistent access path
-50 = error in user parameter list (bad volume)
-49 = file already open with write permission
-48 = a file with this name already exists
-47 = file is busy (File System flag)
-46 = volume is locked (File System flag)
-45 = file is locked (File System flag)
-44 = disk is write protected (hardware)
-43 = file not found
-42 = too many files open (12 max)
-41 = system heap is full
-40 = attempt to position mark before start of file
-39 = logical EOF reached during read operation
-38 = file not open
-37 = bad file or volume/directory name (empty?)
-36 = disk I/O error
-35 = no such volume or directory
-34 = all allocation blocks on the disk are full
-33 = file directory full
-32 = undocumented error code
-31 = undocumented error code
-30 = dce extension error
-29 = Unit table full
-28 = can't rd/wr/ctl/sts - drvr not open
-27 = I/O call aborted by KillIO
-26 = DrvrInstall couldn't find driver
-25 = tried to remove an open driver
-24 = driver can't respond to Close call
-23 = driver can't respond to Open call
-22 = refNum specifies NIL handle in unit table
-21 = refNum doesn't match unit table
-20 = driver can't respond to Write call
-19 = driver can't respond to Read call
-18 = driver can't respond to Status call
-17 = driver can't respond to Control call
-16 = Color Manager error
-15 = Color Manager error
-14 = Color Manager error
-13 = Color Manager error
-12 = Color Manager error
-11 = Color Manager error
-10 = Color Manager error
-9 = Color Manager error
-8 = no debugger for debugger command
-7 = undocumented error code
-6 = undocumented error code
-5 = invalid queue element
-4 = unimplemented core routine
-3 = core routine number out of range
-2 = invalid queue element
-1 = queue element not found during deletion